The Blue Diamond® Dual Motor Brush Cutter is in a class of its own! Featuring a new floating deck design, the cutter can cover the uneven ground with ease. The front wheels are adjustable to meet whatever cut height you need. It leaves a very neat finish when mowing grass, and can also cut up to 4” material in the brush.
Features include:
This brush cutter is the most versatile skid steer brush cutter on the market. Cuts grass like a lawn mower and still cut 5″ trees!! Why buy a brush cutter that limits you to one or the other? Very few, if any other cutters are able to preform in such a variety of applications, like the Blue Diamond Extreme Duty cutters will!
The extreme duty brush cutter is a high-powered, low flow or high flow direct drive unit with a 1-year warranty. The purpose built hydraulic motor drives a 3.5” forged one piece drive spindle! that is housed in 2 massive bearings. The direct drive bearing carrier is now grease packed and can be greased from a zerk under the hood. This new improvement has dramatically reduced down time and bearing failures! Under the deck, instead of a spline shaft, it has a 13” x 1” flange with 10 bolts connecting the blade carrier. The wire protection kit between the deck and the blade carrier keeps fence wire and vines away from the lower bearing seal and reduces down time from hidden debris. This powerful yet quiet cutter will produce a cleaner cut at a quicker travel speed than was thought possible on a low flow skid steer. The 10” deck clearance and the raised back allow cut debris to escape and to easily avoid bunching under the deck.
New design.
This new model offers many new upgrades including:
These new upgrades have made this model a high-performance cutter that is priced right for the customer that is not an everyday commercial user. Mows excellent in the grass and cuts up to 4″ brush with ease!
The tapered back allows cut debris to roll out consistently and helps to float over stumps. The grease-filled drive is much more reliable than oil and requires less maintenance.
The newly added perimeter wire guard spools up wire out where it can be accessed easily with wire cutters. If the wire does manage to get by the perimeter wire guard, the secondary wire guard will stop it.
The heavily reinforced deck has many new features for strength and to make it easier to clean. The deck is thicker and uses above and under deck reinforcements in high-stress areas. Also added are wear bars on the sides to give longer life if used in abrasive ground conditions.
The incredible power and versatility in this skid steer brush cutter will all but remove the need for a mulching head. 10” cut capacity and incredible performance in grass make this brutally tough unit the top in its class. Using the highest quality piston motor on the market, torque throughout its flow range is unmatched. The visible pressure gauge keeps you aware of the work load and will allow you to work at peak performance, increasing productivity tremendously! Adjustable skid shoes allow the cutting height to be altered. The mammoth 1” thick blade carrier weighs over 500 lbs and has a serrated edge to help with mulching and destroying fence wire that so often takes out brush cutters. The best just got better!!
PREMIUM FEATURES:
The Blue Diamond® Swing Arm Cutter is a great implement to add to your collection. It is designed for cutting banks, right of ways, and fence lines. The cutter also works great for clearing pond banks and cutting trails. This cutter has a significant reach advantage over our typical cutter.
With a reach of 96″ when extended horizontally and a vertical reach of 16′, it makes clearing unwanted tree limbs less of a hassle. The cutter will also swing to the right and can be used as a side cutter. It is powered by a Gerolar or direct drive piston motor with a bearing housing with a 4000 max PSI. The Gerolar motor requires 14-20 GPM and the piston motor requires 17-30 GPM.
Features include:
• Reach advantage over our typical cutter
• Can be used as a side cutter
• Direct drive piston motor with max 4000 PSI • 3″ x 16″ tilt cylinders
• 5/8″ AR400 Blades
• 44″ cut
• 4″ cutting capacity
• Requires case drain
• Optional universal, 8 pin or 14 pin wiring harness are available
*The one year warranty does not cover the blades and hoses.
All Rights Reserved | Amarillo Machinery Company